Axim X-108NX Manual do Utilizador descarregar pdf (Página 34)

5.4.2 Add Routing Rule

1. Click on [Add] tab. You will see the following screen.

2. Configure the Routing rule following the instructions below.

Sequence Number

This defines the sequence of the Routing rules. If a packet fits the

conditions set by the Routing rules, the packet will then be sorted

according to the first Routing rule from the top of the list.

Rule Name

Name of the Routing rule.

Enable

Enable/Disable this Routing rule

Internal IP Range

Set up the internal IP range for this ACL rule.

External IP Range

Set up the external IP range for this ACL rule.

Protocol

Set up the protocol (TCP or UDP) for the ACL to be enabled.

Service Port Range

Set up the Service Port Range (e.g., HTTP is TCP/80) for the ACL to be

enabled.

External Interface

Please select which External Interface (WAN1 or LAN1) you want for a

packet to go through, if the packet fits the condition of this ACL rule.

Routing Gateway

Please select which Gateway(Default or Static) you want to route to.

Gateway IP Address

Please enter the Gateway IP Address if you choose Static Gateway in

the Routing Gateway menu.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 93 94

Sem comentários

Axim X-108NX Manual do Utilizador Página 34